|
|
| Technical Specifications
|
Item |
Description |
|
Product configuration |
|
Produce model |
Console port |
RM3A Module Slot |
Power Slot |
Fan Slot |
SNA/IPSec jack |
Control card slot |
|
MP7204 |
1 |
4 |
2 |
1 |
1 |
1 |
|
MP7208 |
1 |
8 |
2 |
1 |
1 |
1 |
|
Performance parameters |
|
Control card type |
RM7A-MPU306-3GE series |
RM7A-MPU308-3GE series |
|
Processor |
High-speed MIPS processor |
High-speed MIPS processor |
|
Flash |
Default: 16MB
Expandable to 80MB |
Default: 16MB
Expandable to 80MB |
|
Memory |
Expandable to 1GB DDR400 |
Expandable to 1GB DDR400 |
|
MTBF (mean time between failures) |
100000 hours |
|
Bus bandwidth |
8G |
|
Maximal route table capability |
440K (1Gbyte memory) |
|
Maximal access list capability |
500000 entries |
|
1518-byte delay |
4us |
|
Standards & protocols |
|
Link protocol |
PPP, PPPoE, SLIP, SDLC, FR,ATM, LLC2, ISDN, X.25, HDLC, LAPB, Ethernet_II, Ethernet_SNAP, 802.1Q, ISDN |
|
Network protocol |
TCP/IP, ICMP, UDP, FTP, TFTP, RLOGIN, DHCP, HTTP, DNS, DDNS,ARP, DLSw, DDR,NAT,NTP,IPFIX |
|
Routing protocol |
Static routing protocol, RIPv1, RIPv2, OSPF, BGP, ISIS,NDSP, IRMP, SNSP, IGMP, DVMRP,MSDP, PIM-SM/DM/SDM/SSM, Policy route, VBRP, VRRP,MVPN, LDP, MPLS VPN, MPLS L2/L3VPN,MPLS TE,VPLS |
|
Network security |
PPP encryption, L2TP,L2TPv3, GRE, AAA, ACL, IPSec, IKE, PKI, CA |
|
QoS |
FIFO, PQ, CQ, FQ, WFQ, CBWFQ, LLQ, RSVP, CAR, SPD, WRED, Traffic Shaping |
|
Management |
SNMPv1/v2c/v3, MIB, SYSLOG, RMON, SSHv2, telnet |
|
Physical index |
|
Details |
MP7204 |
MP7208 |
|
Dimension (H x W x D) |
100mm x 444mm x 360mm |
155mm x 444mm x 360mm |
|
Weight |
12.5KG (full-load) |
20KG (full-load) |
|
Power supply |
|
Input voltage (AC) |
Voltage: 100~240V
Current: 1.2A
Frequency: 50/60Hz |
|
Power consumption |
200W |
|
Input voltage (DC) |
Voltage: -40 ~ -57V
Current: 1.8A |
|
Power consumption |
200W |
|
Environmental parameters |
|
Short-term operation temperature |
0~40 Centi-degree |
|
Long-term operation temperature |
15~30 Centi-degree |
|
Short-term operation relative humidity |
10~90%
Non-condensing |
|
Long-term operation relative humidity |
40~65%
Non-condensing |
|
|
|
|
|
|
|
|
|
Order Information
|
Product model |
Description |
|
Chassis (Mandatory) |
|
RM7208-MF |
MP7208 chassis (eight module slots, one control slot, two power slots, one fan slot) |
|
|
MP7204 chassis (four module slots, one control slot, two power slots, one fan slot) |
|
Fan (Mandatory) |
|
RM7208-FAN |
MP7208 FAN |
|
RM7204-FAN |
MP7204 FAN |
|
Control card (Mandatory) |
|
RM7A-MPU306-3GE |
Control module. Three fixed 10/100/1000M Combo ports, fixed 16Mbyte flash, one flash slot, two memory slots, one SNA and IPSec jack. |
|
RM7A-MPU308-3GE |
Control module. Three fixed 10/100/1000M Combo ports, fixed 16Mbyte flash, one flash slot, two memory slots, one SNA and IPSec jack.(higher performance) |
|
Power supply (Mandatory) |
|
AD230-1T004 |
AC power supply module, each MP7200 chassis support two power supply modules for backup mutually. Suitable for MP7208 |
|
AD250-1T004 |
AC power supply module, each MP7200 chassis can support two power supply modules for backup mutually. Suitable for MP7204 |
|
DD250-5T0041 |
DC power supply module, each MP7200 chassis can support two power supply modules for backup mutually. Suitable for MP7208 |
|
DD250-5T0042 |
DC power supply module, each MP7200 chassis can support two power supply modules for backup mutually. Suitable for MP7204 |
|
DD250-5T004B1 |
DC power supply module, each MP7200 chassis can support two power supply modules for backup mutually. Suitable for MP7208(adopt binding post) |
|
DD250-5T004B2 |
DC power supply module, each MP7200 chassis can support two power supply modules for backup mutually. Suitable for MP7204(adopt binding post) |
|
FLASH |
|
FLASH8M-D168-64 |
8Mbyte Flash card (8Mbyte, 168 pins, 64-bit data) |
|
FLASH16M-D168-64 |
16Mbyte Flash card (16Mbyte, 168 pins, 64-bit data) |
|
FLASH32M-D168-64 |
32Mbyte Flash card (32Mbyte, 168 pins, 64-bit data) |
|
FLASH64M-D168-64 |
64Mbyte Flash card (64Mbyte, 168 pins, 64-bit data) |
|
Memory (Mandatory) |
|
DDR333-128D |
Memory: 128Mbyte
Access speed: 333MHz |
|
DDR400-256D |
Memory: 256Mbyte
Access speed: 400MHz |
|
DDR400-512D |
Memory: 512Mbyte
Access speed: 400MHz |
|
RM3A High-speed MIM module |
|
RM3A-4SAH |
Four-port synchronous/asynchronous serial-port module (supports hot-swappable) |
|
RM3A-4E1H |
Four-port non-channelized E1 module (support hot-swappable,
75?? BNC interface) |
|
RM3A-4E1BH |
Four-port non-channelized E1 module (support hot-swappable,120??RJ45 interface) |
|
RM3A-8E1H |
Eight-port non-channelized E1 module (support hot-swappable, 75?? BNC interface) |
|
RM3A-8E1BH |
Eight-port non-channelized E1 module (support hot-swappable, 120??RJ45 interface) |
|
RM3A-4CE1H |
Four-port channelized E1/ ISDN PRI module (support hot-swappable, 75?? BNC interface) |
|
RM3A-4CE1BH |
Four-port channelized E1/ ISDN PRI module (support hot-swappable, 120??RJ45 interface) |
|
RM3A-8CE1H |
Eight-port channelized E1/ ISDN PRI module (support hot-swappable, 75?? BNC interface) |
|
RM3A-8CE1BH |
Eight-port channelized E1/ ISDN PRI module (support hot-swappable, 120??RJ45 interface) |
|
RM3A-2FEH |
Two-port 100Mbps Ethernet module (supports hot-swappable). The module provides two 100M/10M electric Ethernet interfaces and two slots for 100Mbps SFP optical module slot. The electric interface and optical interface operate exclusively. |
|
RM3A-1ATM-OC3AH |
One-port 155M ATM module (155M SFP optical module is required, supports hot-swappable) |
|
RM3A-1POS-OC3H |
One-port 155M POS module (155M SFP optical module is required, supports hot-swappable) |
|
RM3A-1CPOS-OC3H |
One-port 155M CPOS module (155M SFP optical module is required, supports hot-swappable) |
|
RM3A-8GETH |
8-port Gigabit electric port(supports hot-swappable) |
|
SNA/IPSec jack |
|
IPSec |
IPSec chip |
|
RM-C-0002 |
SNA chip |
|
RM-C-0003 |
IPSec + SNA chip |
|
Optical module |
|
SFP-S2-L03P3 |
The 155M single mode optical module (transmission distance: 20km, LC interface, PECL interface level, wavelength: 1310nm) adopts to RM3A-1ATM-OC3AH, RM3A-1POS-OC3H, RM3A-1CPOS-OC3H,RM3A-2FEH. |
|
SFP-M2-L03P8 |
The 155M multi-mode optical module (transmission distance: 2km, LC interface, PECL interface level, wavelength: 850nm) adopts to RM3A-1ATM-OC3AH, M3A-1POS-OC3H, RM3A-1CPOS-OC3H ,RM3A-2FEH |
|
SFP-S2-L24P3 |
The 1.25G single mode optical module (transmission distance: 20km, LC interface, LC interface, PECL interface level, wavelength: 1310nm), adapts to controller card. |
|
SFP-M1-L24P8 |
The 1.25G multi-mode optical module (transmission distance: 550m, LC interface, PECL interface level, wavelength: 850nm) adapts to controller card. |
|
|
|
