|
Table 1. Product Specifications
|
Specifications |
|
Multi-WAN |
Supports up to 7 WAN ports with load balancing; WAN ports may be configured to support only specified IP ranges and/or services |
|
Standards |
• 802.3, 802.3u
• IPv4 (RFC 791)
• Routing Information Protocol (RIP) v1 (RFC 1058) and v2 (RFC 1723) |
|
Network protocols |
• Dynamic Host Configuration Protocol (DHCP) server, DHCP client, DHCP relay agent
• Static IP
• Point-to-Point Protocol over Ethernet (PPPoE)
• Point-to-Point Tunneling Protocol (PPTP)
• Transparent bridge
• DNS relay, Dynamic DNS (DynDNS, 3322) |
|
Routing protocols |
• Static
• RIP v1 and v2 |
|
Network Address Translation (NAT) |
• Port Address Translation (PAT)
• Network Address Port Translation (NAPT), NAT traversal, one-to-one NAT |
|
Protocol binding |
Protocols can be bound to a specific WAN port for load balancing |
|
DMZ |
Dedicated DMZ port, DMZ host |
|
Security |
|
Firewall |
SPI, denial of service (DoS), ping of death, SYN flood, land attack, IP spoofing, email alert for hacker attack |
|
Access rules |
Up to 50 entries |
|
Port forwarding |
Up to 30 entries |
|
Port triggering |
Up to 30 entries |
|
Blocking |
Java, cookies, ActiveX, HTTP proxy |
|
Content filtering |
Static URL blocking or keyword blocking |
|
Web filtering |
Optional Cisco ProtectLink Web cloud-based security service |
|
Secure management |
HTTPS, username/password, password complexity |
|
VPN |
|
IPsec |
100 IPsec site-to-site tunnels for branch office connectivity |
|
QuickVPN |
50 QuickVPN tunnels for remote client access |
|
PPTP |
10 PPTP tunnels for remote access |
|
Encryption |
Data Encryption Standard (DES), Triple Data Encryption Standard (3DES), and Advanced Encryption Standard (AES) encryption; AES-128, AES-192, AES-256 |
|
Authentication |
MD5/SHA1 authentication |
|
IPsec NAT traversal |
Supported for gateway-to-gateway and client-to-gateway tunnels |
|
VPN pass-through |
PPTP, L2TP, IPsec |
|
Advanced VPN |
Dead peer detection (DPD), IKE, split DNS, VPN backup |
|
Quality of Service (QoS) |
|
Prioritization types |
Application-based priority on WAN port |
|
Service-based QoS |
Supports rate control or priority |
|
Rate control |
Upstream/downstream bandwidth can be configured per service |
|
Priority |
Each service can be mapped to one of 3 priority levels |
|
Performance |
|
NAT throughput |
200 Mbps |
|
IPsec VPN throughput |
97 Mbps |
|
Configuration |
|
Web user interface |
Simple browser-based device manager (HTTP/HTTPS) |
|
Management |
|
Management protocols |
Web browser, Simple Network Management Protocol (SNMP) v1 and v2c, Bonjour |
|
Event logging |
Syslog, email alerts, VPN tunnel status monitor |
|
Upgradability |
Firmware upgradable through web browser, imported/exported configuration file |
System Specifications
Table 2 lists the system specifications for the Cisco RV042.
Table 2. System Specifications
|
Product dimensions
(W x H x D) |
11.00 in. x 1.75 in. x 9.50 in.
279.4 mm x 44.45 mm x 241.3 mm |
|
Ports |
16 10/100 RJ-45 ports, including 2 WAN (Internet) ports, 1 dedicated DMZ port, 8 dedicated LAN ports, and 5 ports that may be configured as WAN (Internet) or LAN ports |
|
Power |
AC 100~240V, 50~60Hz |
|
Certification |
FCC class B, CE Class A, cUL, Anatel, MEPS, CCC, PSB, CB, C-tick, KCC |
|
Operating temperature |
0° to 40°C (32° to 104°F) |
|
Storage temperature |
0° to 70°C (32° to 158°F) |
|
Operating humidity |
10% to 85% noncondensing |
|
Storage humidity |
5% to 90% noncondensing | |
