|
Цена: 518812 руб
| 3K | |||||||||
Indirect routes |
2K |
2K |
0 |
8K | |||||||
Security ACEs |
1K |
2K |
1K |
1K | |||||||
QoS ACEs |
0.5K |
0.5K |
0.5K |
0.5K | |||||||
PBR ACEs |
0 |
0.5K |
0 |
0.5K | |||||||
Connectors and Cabling |
• 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling • 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive) • 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling • 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive) • 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling • 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber) • Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm • Management console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections, use RJ-45-to-DB-25 female data-terminal-equipment (DTE) adaptor (can be ordered separately from Cisco; part number ACS-DSBUASYN=) | ||||||||||
Power Connectors |
• Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.Internal-Power-Supply Connector • The internal power supply is an autoranging unit. • The internal power supply supports input voltages between 100 and 240 VAC. • Use the supplied AC power cord to connect the AC power connector to an AC power outlet. • Cisco RPS Connector • The connector offers connection for an optional Cisco RPS 2300 (model PWR-RPS2300) that uses AC input and supplies DC output to the switch. | ||||||||||
Indicators |
• Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications • System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications | ||||||||||
Dimensions(H x W x D) |
Inches |
Centimeters | |||||||||
3560V2-24TS |
1.73 x 17.46x 11.62 |
4.4 x 44.3 x 29.5 | |||||||||
3560V2-48TS |
1.73 x 17.46x 11.62 |
4.4 x 44.3 x 29.5 | |||||||||
3560V2-24PS |
1.73 x 17.46x 11.62 |
4.4 x 44.3 x 29.5 | |||||||||
3560V2-48PS |
1.73 x 17.46x 11.62 |
4.4 x 44.3 x 29.5 | |||||||||
3560V2-24DC |
1.73 x 17.46x 11.62 |
4.4 x 44.3 x 29.5 | |||||||||
Weight |
Pounds |
Kilograms | |||||||||
3560V2-24TS |
8.2 |
3.7 | |||||||||
3560V2-48TS |
9 |
4 | |||||||||
3560V2-24PS |
10 |
4.6 | |||||||||
3560V2-48PS |
11 |
5 | |||||||||
3560V2-24DC |
8 |
3.7 | |||||||||
Environmental Ranges |
Fahrenheit |
Centigrade | |||||||||
Operating temperature |
32 to 113?F |
0 to 45?C | |||||||||
Storage temperature |
-13 to 158?F |
-25 to 70?C | |||||||||
Feet |
Meters | ||||||||||
Operating altitude |
Up to 9,843 ft |
Up to 3,000 m | |||||||||
Storage altitude |
Up to 15,000 ft |
Up to 4,573 m | |||||||||
Operating relative humidity |
10 to 85% noncondensing | ||||||||||
Storage relative humidity |
10 to 85% noncondensing | ||||||||||
Acoustic Noise |
ISO 7779 & ISO 9296: Bystander positions operating to an ambient temperature of 25°C | ||||||||||
Sound Pressure |
Sound Power | ||||||||||
LpA (Typical) |
LpAD (Maximum) |
LwA (Typical) |
х |